• ATTENZIONE! Le spedizioni potrebbero subire ritardi a causa della ridotta operatività dei corrieri
    WARNING! We expect delay in shipping due to reduced courier operations

1.75 mm ALFAplus filament, White


Biobased technopolymer with excellent mechanical properties of torsion and tensile strength, if annealed can withstand high temperatures up to 105 °C. → White

Buy - Prices VAT included
Sample (4 meters) €1,80
10 meters €3,50
15 meters €4,80
30 meters on spool €8,80
45 meters on spool €12,80
60 meters on spool €16,80
Spool 700 g €24,00



Bio-based filament in white.


  • Easy to print
  • Bio-based technopolymer, eco-friendly
  • Tensile strength 50% more than standard ABS
  • High mechanical properties
  • High thermal resistance, if annealed
  • UV resistance
  • Zero warping
  • No harmful smell when printing
  • Heated bed not required

Tech specifications

Nominal diameter 1.75 mm
Warp low
Flexibility n.a.
Break resistance high
Printing temperature 190-210 °C
Temperature resistance up to ~ 105 °C if annealed


Heated bed not required, if available set it between 0-50 °C. Recommended print speed 40-120 mm/s.

How to do "Heat Treatment"
Heat the object printed with ALFAplus in the oven from 1 to 4 hours at a temperature of 80 °C in order to anneal and increase the thermal resistance up to 105 °C.

In case of thin walls or critic details it is advisable to put the printed object in a container suitable for oven and fill the container with water or sand, then cook and finally remove the water or sand to proceed with the post-processing.

Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.