1.75 mm ALFApro filament, WhiteFiloAlfa
ALFApro, the new generation of ALFAplus, is a filament designed to gain the best printing results: easy to print, durable, high temp resistant, perfect for outdoor use, with a superior finishing. → White
|Buy - Prices VAT included|
Bio-based filament in white.
- Easy to print
- Bio-based technopolymer, eco-friendly
- High mechanical properties
- High thermal resistance, if annealed
- UV and hydrolisis resistance
- Sandable and post workable
- No harmful smell when printing
- Excellent surface finish (no layer visible)
|Nominal diameter||1.75 mm|
|Printing temperature||190-210 °C|
|Temperature resistance||up to ~ 116 °C if annealed|
To print ALFApro set the heated bed between 0-70 °C. Recommended print speed 40-120 mm/s. Cooling fan on.
ALFApro is easy to print and the addition of a mineral filler makes the material easier to work and with a very high aesthetic yield. Objects printed in ALFApro can be sanded and post-processed.
How to do "Heat Treatment"
Heat the object printed with ALFApro in the oven from 2 to 4 hours at a temperature of 100 °C in order to anneal and increase the thermal resistance up to 116 °C.
In case of thin walls or critic details it is advisable to put the printed object in a container suitable for oven and fill the container with water or sand, then cook and finally remove the water or sand to proceed with the post-processing.
Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.