• ATTENZIONE! Le spedizioni potrebbero subire ritardi a causa della ridotta operatività dei corrieri
    WARNING! We expect delay in shipping due to reduced courier operations

1.75 mm Filaflex flexible filament, Skin


Filaflex 95A Med-Flex is a semi-flexible TPU with excellent mechanical and chemical properties, high layer adhesion. Hot bed not required, easy to use, compatible with 3D printers with extruders not optimized for flexible filaments.

Buy - Prices VAT included
Sample (4 meters) €2,50
Spool 500 g €35,00



Flexible TPU filament in skin color.


  • Hardness Shore 95A
  • Ability to withstand wear and tear
  • High abrasion resistance
  • Odorless
  • Resistant to common solvents (acetone, fuel, etc.)
  • Excellent build platform adhesion and bonding between layers
  • Heated bed not required

Tech specifications

Nominal diameter 1.75 mm
Warp n.a.
Flexibility high
Break resistance very high
Printing temperature ~ 210-230 °C
Glass Transition Temperature n.a.


Heated bed, blue-tape or buildtak surface not required. For huge parts it is recommend 3D lac or hairspray. Suggested print speed: 15-40mm/s. 

Flexible and resistant parts like medical prosthetics.

When switching from another polymer (such as ABS or PLA) purge thoroughly before starting a print. As with other materials, when preheating, use a lower temperature (~180-200°C) to prevent excess material from draining prior to starting a print.

Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.