1.75 mm ABS-3d FC medical filament, Natural
FiloAlfaHigh performance and ease to print ABS; suitable for food contact and medical applications. Created by FiloAlfa in collaboration with ELIX Polymers.
Buy - Prices VAT included |
---|
ABS filament, biocompatible medical grade, in natural color.
Features
- Non-toxic
- Excellent surface finish
- Low emissions and odor
- Medical grade pellet
- Food contact approved
- USP Class VI
- FDA compliant
Tech specifications
Nominal diameter | 1.75 mm |
Warp | medium |
Flexibility | n.a. |
Break resistance | high |
Printing temperature | 230-250 °C |
Temperature resistance | ~ 97 °C |
Tips&Tricks
To print ABS-3d FC set the heated bed between 80-100 °C. Recommended print speed 30-50 mm/s. Cooling fan off.
The ABS-3d FC pellet is certified for standard biocompatibility for food contact and medical applications.
The material is compliant with the following reference standards:
- Biocompatible: ISO 10993-1 USP Class VI
- Food contact approved material acc. EU No 10/20111 and 21 CFR FDA
TIPS!
If the material has absorbed too much moisture, dry the filament from 2 to 4 hours at a temperature of 70-80 °C in order to improve the printability.
Applications
Medical devices, food design
Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.