1.75 mm PLA Fablab filament, Grey - Big spool

FiloAlfa

PLA Fablab is made from the leftovers of FiloAlfa PLA processing and has the same quality. However, it is not possible to guarantee the same color from one spool to another. Suitable for quick and economical prints.

Buy - Prices VAT included
Big spool 2,5 kg €45,00

Plastic filament out of PLA in grey.

Features

  • Easy to print
  • Shiny finishing
  • Good mechanical properties
  • Low retraction
  • Heated bed not required
  • The color varies from one reel to another

Tech specifications

Nominal diameter 1.75 mm
Warp low
Flexibility low
Printing temperature  170-210 °C
Temperature resistance up to ~ 50 °C

Tips&Tricks

Heated base not required, if available set the temperature between 0 and 50 ° C. Recommended printing speed: 40-120 mm/s.

The PLA Fablab is produced using the processing waste from other FiloAlfa PLAs. The PLA Fablab therefore has the same quality as the standard FiloAlfa PLA but the color varies from one reel to another. We recommend the PLA Fablab for study prototypes or large prints where the final color is not of fundamental importance or in cases where the printed object will be painted.

Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.


Datasheet