1.75 mm S-PVA water soluble support filament
Neofil 3DS-PVA is a water-soluble and biodegradable support material. Used in double extrusion, it allows excellent adhesion to Styrene based materials such as ABS, ASA or TPU.
Buy - Prices VAT included |
---|
PVA based filament in natural color.
Features
- Compatible with Styrene based materials
- Soluble in water
- Biodegradable
- Better temperature resistance than other PVAs
- Excellent layers adhesion
- High printing temperature
- Less odor when printing
- RoHS compliant
Tech specifications
Nominal diameter | 1.75 mm |
Warp | n.a. |
Flexibility | n.a. |
Break resistance | low |
Printing temperature | ~ 235-250 °C |
Temperature resistance | max 60 °C |
Tips&Tricks
You can print S-PVA at high temperatures. It is recommend to heat the bed up to 80 °C and facilitate the adhesion to the bed with spray or glue. Set the cooling fans between 0 and 70%.
Suggested printing speed: 30-40mm/s.
TIP!
The S-PVA maintains its performance in high temperature environments (up to 60 °C) but easily dissolves in warm water even if slower than other PVAs. To speed up the process, heat the water up to 40 °C. Moving water can also dissolve S-PVA faster.
TIP!
To preserve the filament, keep away from humidity and sunlight. For better results, use the filament within 3-4 weeks after opening.
Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.