2.85 mm Laywoo-D3 wood filamentLay Filaments
Laywoo-D3 from Kai Parthy contains about 35% recycled wood. You can print objects that look and smell like wood and you can cut, grind and paint your creations as you can do with wooden objects.
|Buy - Prices VAT included|
- No warping
- Smells like wood
- Heated bed not required
- Varying extruder termperature will change the brightness of printed material
|Nominal diameter||2.85 mm|
|Printing temperature||175-250 °C|
The thermal strength of Laywoo-D3 filament is similar to PLA and can be printed between 175 and 250 °C. If you have a heated bed, set it at about 50 °C and print directly on Kapton tape.
Depending on the temperature at which Laywoo-D3 filament is printed, it will take on a different shade of brown. This means that by intentionally varying the printing temperature, you can simulate a tree’s growth ring effect.
At 180 °C your Laywoo-D3 Flex prints will have a light colour and at 245 °C your print will become darker.
It is recommended to use a 0.5mm nozzle for the Laywoo-D3 to stop clogging of the nozzle.
Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.