1.75 mm PLA filament, Glitter Purple
FiloAlfaAn easy-to-print Glitter PLA! PLA is a biodegradable resource. It is non-toxic and has a pleasant smell when printing. For your special creations add a glitter touch! No abrasive fillers.
| Buy - Prices VAT included |
|---|
Plastic filament out of PLA in purple with glitter inside.
To avoid any little risk of clogging, be sure to clean your nozzle after printing with glitter.
Features
- Glitter!
- Hard material
- Much less warp than ABS
- Easy to print
- Intense color
- Optimized for printers without heated bed
- Food and skin safe
Tech specifications
| Nominal diameter | 1.75 mm |
| Warp | low |
| Flexibility | low |
| Break resistance | low |
| Printing temperature | 170-210 °C |
| Temperature resistance | up to ~ 50 °C |
Tips&Tricks
Heated bed not required, if available set it between 0-50 °C. Use a suitable tape on the printing plate such as Kapton tape or blue tape.
Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.
