1.75 mm Laywoo-D3 Flex flexible filament

Lay Filaments

Laywoo-D3 Flex from Kai Parthy is a mixture of about 35% recycled wood with a binding polymer. You can print bendable objects that look and smell like wood and you can cut, grind and paint your creations as you can do with wooden objects.

Buy - Prices VAT included
Coil 250 g €27,90 €13,95


Flexible wood filament.


  • No warping
  • Bendable
  • Smells like wood
  • Heated bed not required
  • Varying extruder termperature will change the brightness of printed material
  • Elasticity will be higher on darker layers

Tech specifications

Nominal diameter 1.75 mm
Warp very low
Flexibility high
Break resistance n.a.
Printing temperature 175-250 °C
Temperature resistance n.a.


The thermal strength of Laywoo-D3 Flex filament is similar to PLA and can be printed between 175 and 250 °C. If you have a heated bed, set it at about 50 °C and print directly on Kapton tape.
Depending on the temperature at which Laywoo-D3 Flex filament is printed, it will take on a different shade of brown. This means that by intentionally varying the printing temperature, you can simulate a tree’s growth ring effect.
At 180 °C your Laywoo-D3 Flex prints will have a light colour and at 245 °C your print will become darker.
Darker prints (higher temperature) are more flexible than lighter prints (lower temperature).

It is recommended to use a 0.5mm nozzle for the Laywoo-D3 Flex to stop clogging of the nozzle.

Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.