1.75 mm PLA filament, White
Orbi-TechPLA is a biodegradable resource. It is non-toxic and has a pleasant smell when printing. PLA has very minimal shrinkage (warp) for easy printing of detailed objects.
Buy - Prices VAT included |
---|
Plastic filament out of PLA in white.
Features
- Much less warp than ABS
- Easy to print
- Intense color
- Optimized for printers without heated bed
- Food and skin safe
Tech specifications
Nominal diameter | 1.75 mm |
Warp | low |
Flexibility | low |
Break resistance | low |
Printing temperature | ~ 210 °C |
Temperature resistance | up to ~ 72 °C |
Tips&Tricks
Heated bed not required, if available set it between 40-60 °C. Use a suitable tape on the printing plate such as Kapton tape or blue tape.
Due to all the different types of hot-end it's extremely difficult to give a temperature advice. Please consider our tips as a starting point to find the temperatures that work well in your setup. You may have to adjust the temperature settings slightly based on your type of printer.